We accept TnG, Setel, Alipay, Shopee Pay, Grab Pay, Duit Now, and Boost. AmBank credit card holders are eligible for exclusive payment plans; others bank clients should check with their credit card issuers

Share:


🔥READY STOCK 🔥PROTON EXORA PATCO INLET PIPE C/C HS-3893.M

RM90.00



Specifications

Weight(grams): 4000

Dimension: 6 cm (Length) x 5 cm (Width) x 6 cm (Height)

Inlet Tube/Inlet Pipe in Car Air Conditioning (A/C) System

Role and Functions

  1. Refrigerant Transport: The inlet tube, also known as the suction line, transports low-pressure, low-temperature refrigerant gas from the evaporator to the compressor. It is a vital component for the proper circulation of refrigerant within the A/C system.
  2. Heat Absorption: As the refrigerant moves through the inlet tube, it absorbs heat from the cabin air via the evaporator. This helps cool the air inside the vehicle.
  3. Maintaining System Pressure: The inlet tube helps maintain the correct pressure levels within the A/C system, ensuring efficient refrigerant flow and proper system function.

Maintenance Tips

  1. Regular Inspections: Periodically check the inlet tube for signs of wear, damage, or leaks. Look for cracks, corrosion, or any unusual signs that might indicate a problem.
  2. Cleanliness: Keep the inlet tube and surrounding components clean to prevent dirt and debris from causing damage or obstructing the refrigerant flow.
  3. Proper Fitting: Ensure that the inlet tube is properly connected and fitted to the evaporator and compressor. Loose or improperly connected tubes can lead to leaks and reduced efficiency.
  4. Check for Leaks: Use a UV dye or electronic leak detector to check for refrigerant leaks in the inlet tube. If a leak is detected, have it repaired immediately to prevent loss of refrigerant and damage to the A/C system.
  5. Monitor Performance: Pay attention to the performance of the A/C system. If you notice reduced cooling efficiency, strange noises, or unusual odors, inspect the inlet tube as part of your troubleshooting process.
  6. Professional Maintenance: Schedule regular maintenance with a qualified technician to inspect and service the entire A/C system, including the inlet tube. Professional maintenance ensures that any issues are detected and addressed early.

Maintenance Steps (Summary)

  1. Visual Inspection: Regularly inspect the inlet tube for visible damage, wear, or leaks. Look for cracks, corrosion, and signs of refrigerant leakage.
  2. Clean Surrounding Area: Keep the area around the inlet tube clean and free from debris to prevent contamination and damage.
  3. Secure Connections: Ensure that all connections are tight and secure. Check the fittings at both the evaporator and compressor ends.
  4. Leak Detection: Use a UV dye or electronic leak detector to check for refrigerant leaks. Address any leaks promptly by repairing or replacing the inlet tube.
  5. Monitor A/C Performance: Regularly monitor the A/C system's performance. Reduced cooling efficiency or unusual noises may indicate a problem with the inlet tube or other components.
  6. Professional Check-ups: Have the A/C system professionally inspected and serviced at recommended intervals. A qualified technician can identify and fix issues that may not be visible during a visual inspection.

Proper maintenance of the inlet tube in the car A/C system ensures efficient refrigerant flow and overall system performance, contributing to a comfortable and cool cabin environment.

汽车空调系统中的进气管

作用和功能

  1. 制冷剂运输:进气管,也称为吸气管,将低压低温的制冷剂气体从蒸发器输送到压缩机。它是空调系统中制冷剂循环的重要组成部分。
  2. 吸热:当制冷剂通过进气管时,通过蒸发器吸收车厢内空气的热量,从而冷却车内空气。
  3. 保持系统压力:进气管帮助维持空调系统内的正确压力水平,确保制冷剂流动顺畅和系统功能正常。

维护方法

  1. 定期检查:定期检查进气管是否有磨损、损坏或泄漏的迹象。查找裂缝、腐蚀或其他异常情况。
  2. 保持清洁:保持进气管及其周围部件的清洁,以防止污垢和碎片造成损坏或阻碍制冷剂流动。
  3. 正确连接:确保进气管与蒸发器和压缩机的连接正确且牢固。松动或连接不当的管道会导致泄漏和效率降低。
  4. 检查泄漏:使用紫外线染料或电子泄漏检测器检查进气管是否有制冷剂泄漏。如果发现泄漏,立即修理以防止制冷剂流失和空调系统损坏。
  5. 监测性能:注意空调系统的性能。如果发现制冷效率降低、奇怪的噪音或异味,请在排查过程中检查进气管。
  6. 专业维护:安排专业技术人员定期维护,检查和服务整个空调系统,包括进气管。专业维护可以确保及时发现和解决问题。

维护步骤(总结)

  1. 目视检查:定期检查进气管是否有明显的损坏、磨损或泄漏迹象。查找裂缝、腐蚀和制冷剂泄漏的迹象。
  2. 清洁周围区域:保持进气管周围区域清洁,防止污染和损坏。
  3. 确保连接牢固:确保所有连接都紧固且牢固。检查蒸发器和压缩机端的接头。
  4. 泄漏检测:使用紫外线染料或电子泄漏检测器检查制冷剂泄漏。及时修复或更换有问题的进气管。
  5. 监测空调性能:定期监测空调系统的性能。制冷效率降低或异常噪音可能表明进气管或其他组件存在问题。
  6. 专业检查:按照建议的间隔进行专业检查和维护。认证技术人员可以识别和修复在目视检查中可能未发现的问题。

妥善维护汽车空调系统中的进气管可以确保制冷剂的高效流动和整体系统性能,为车厢提供舒适凉爽的环境。



 Inquiry - 🔥READY STOCK 🔥PROTON EXORA PATCO INLET PIPE C/C HS-3893.M